Install roller sunblind

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Replace the sleeve (1) .
Parts : sleeve

Courtesy of BMW OF NORTH AMERICA, INC.
Hook the slider (1) in the frame.

Courtesy of BMW OF NORTH AMERICA, INC.
Snap-in the slider (1) to the rear in the driver (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Make sure the roller sunblind (1) and cable linkage (2) do not get jammed by the slider (3) .

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the roller sunblind (1) in the sleeve (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Insert the roller sunblind (1) with the holding fixture (2) in the mount (3) and snap it in arrow direction.
Remove the holding fixture (2) .

Courtesy of BMW OF NORTH AMERICA, INC.