Installing the bearing bracket (automatic transmission)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Install bearing bracket (3).
- Replace nuts (2).
Parts: Nuts
- Install the nuts (2) and tighten.
TIGHTENING TORQUE SPECIFICATIONS
| Pedal bracket on body Replace nuts . | ||
| M8 Replace nuts. |
Tightening torque | 24 Nm |
- Connect the plug connection (1).
- Replace nuts (1).
Parts: Nuts
- Install the nuts (1) and tighten.
TIGHTENING TORQUE SPECIFICATIONS
| Brake booster to pedal assembly console Replace nuts . | ||
| M8 Replace nuts. |
Tightening torque | 24 Nm |
- Install the retaining bolt (1) through the brake pedal.
Lightly grease the retaining bolt (1).
- Replace the retaining clip (2).
Parts: Retaining clip
- Mount the retaining clip (2) on the retaining bolt.
- Install air duct (1).