5171 Gaskets And Loose Body Parts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
5171 TIGHTENING TORQUE OVERVIEW
| Air duct to deformation element | ||
| M6x20 screw | Tightening torque | 4.6 Nm |
| Air duct to deformation element, bottom | ||
| M6x20 screw Replace screws | tightening torque | 8 Nm |
| Air duct to deformation element/cross connection | ||
| M6x20 screw | Tightening torque | 6 Nm |
| Brake air duct to bracket | ||
| Screw | Tightening torque | 4 Nm |
| Firewall lower part on body | ||
| Nut | tightening torque | 2.6 Nm |
| Screw | tightening torque | 2.6 Nm |
| Cover on body | ||
| Hexagon screw | Tightening torque | 3 Nm |
| Cowl cover, top | ||
| screw | Tightening torque | 2.6 Nm |
| Cross-brace to bulkhead | ||
| M10 Replace nut. | tightening torque | 56 Nm |
| Angle of rotation | 45° | |
| Fixture for hood seal to second rear bulkhead upper part | ||
| Thermoplastic hexagon screw | Tightening torque | 2.6 Nm |
| Front wheel arch cover to front bumper panel | ||
| Hexagon screw for thermoplastic plastic | Tightening torque | 2.6 Nm |
| Lower section of rear spoiler to lateral tailgate | ||
| Oval-head screw | Tightening torque | 2.6 Nm |
| Lower section of rear spoiler to tailgate | ||
| Fillister head bolt | Tightening torque | 8 Nm |
| Rear bulkhead to cowl lower part | ||
| Oval-head screw | Tightening torque | 5 Nm |
| Rear spoiler to trunk lid | ||
| Oval-head screw | Tightening torque | 3.1 Nm |
| Strut brace to support bearing | ||
| M10 Replace screw. | tightening torque | 56 Nm |
| Angle of rotation | 90° | |
| Wheel arch cover to body | ||
| Plastic nut | Tightening torque | 2.6 Nm |
| Screw | Tightening torque | 2.6 Nm |