5111 Bumper, Front
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
5111 TIGHTENING TORQUE OVERVIEW
| Air duct to cross connection | ||
| M6x20 screw | Tightening torque | 11.8 Nm |
| Bottom deformation element to adapter plate for front axle support | ||
| Screw | tightening torque | 11.8 Nm |
| Bracing strut to top front bumper support or to top connection | ||
| M6x20 screw | Tightening torque | 11.8 Nm |
| Bumper panel to air duct | ||
| Screw M6 | Tightening torque | 4.6 Nm |
| Bumper panel to headlamp | ||
| Thermoplastic multi-purpose bolt | Tightening torque | 2.5 Nm |
| Deformation element to engine mount | ||
| Hexagon screw Replace screws. | Tightening torque | 100 Nm |
| Angle of rotation | 180° | |
| Deformation element to front axle support adapter | ||
| screw | Tightening torque | 11.8 Nm |
| Fanfare horn to top front bumper support | ||
| Hexagon screw | Tightening torque | 11.8 Nm |
| Front bumper panel to fender | ||
| Screw TS5X35 | Tightening torque | 3 Nm |
| Front bumper panel to undershield | ||
| Thermoplastic hexagon screw | Tightening torque | 2.5 Nm |
| Holder on bumper support | ||
| Thermoplastic bolt | Tightening torque | 4.5 Nm |
| Support for front bottom bumper cover to deformation element | ||
| M6x30 screw | tightening torque | 8 Nm |
| Support lock to deformation element | ||
| M6x20 screw | Tightening torque | 11.8 Nm |
| Top front bumper support to top deformation element | ||
| Hexagon screw M8x95 | Tightening torque | 28 Nm |
| Vertical strut to deformation element | ||
| Flat-head screw M6x20 | Tightening torque | 11.8 Nm |
| Hexagon screw | Tightening torque | 11.8 Nm |
| Washer fluid reservoir holder to adapter plate of front axle support | ||
| Screw | tightening torque | 10 Nm |