3112 Wishbone And Strut With Rubber Mount
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
31 12 AXLE GUIDE AND STRUTS - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
| 1AZ Wishbone to swivel bearing | F39/F45/F46/F48/F49/F52 | M10 | Exclusively use the screw to tighten! | 60 Nm |
| Replace screw and nut. | ||||
| 2AZ Wishbone to front axle support | F39/F45/F46/F48/F49/F52 | M12 | Tighten in normal position! | |
| Replace screw. | ||||
| Joining torque | 100 Nm | |||
| Angle of rotation | 90° | |||
| 3AZ Holder, wishbone rubber mount, to front axle support | F39/F45/F46/F48/F49/F52 | M12 | Replace screws. | 100 Nm |
| Observe installation position of the screws - different lengths! | ||||
| 4AZ Holder, wishbone rubber mount, to body | F39/F45/F46/F48/F49/F52 | M10 | Replace screws. | |
| Joining torque | 56 Nm | |||
| Angle of rotation | 90° |