3231 Steering Column
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
32 31 STEERING COLUMN - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Steering column to cross member | F39/F45/F46/F48/F49/F52 | M8 | 21 Nm | |
| 2AZ Lower steering shaft to steering gear | F39/F45/F46/F48/F49/F52 | M10 | Clean screw thread and remove remains of screw locking agent. Replace screw. |
28 Nm |
| 3AZ Steering column to steering shaft | F39/F45/F46/F48/F49/F52 | M8 | Clean screw thread and remove remains of screw locking agent. Replace screw. |
28 Nm |
3231 TIGHTENING TORQUE OVERVIEW
| Lower steering shaft to steering column | ||
| Clamping bolt M8 Recut screw thread. Replace clamping bolt. No retorque permitted! |
tightening torque | 28 Nm |
| Steering column to dashboard support | ||
| M8 Observe tightening sequence. |
Tightening torque | 21.4 Nm |