Installing the left mixed air flap motor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position the mixed air flap motor (3).
- Connect connectors (2) and lock.
- Tighten down screws (1).TIGHTENING TORQUE SPECIFICATIONS
Heater/air conditioner Screw tightening torque 1.2 Nm
Follow-up work
- Refer to INSTALLING SIDE TRIM PANEL FOR THE LEFT CENTER CONSOLE .
- Refer to ADDRESSING THE CONTROLLER DRIVE .