Install the mid-range speakers in the instrument panel
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the connector below it to the mid-range speaker (2) .
- Position the mid-range speaker (2) in the instrument panel (3) .
- Tighten the screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Loudspeaker to support/support to dashboard/support to body screw Tightening torque 1.8 Nm - Check the latch mechanisms on the speaker cover (1)
for damage and replace them if necessary.
The latch mechanisms must not be missing or faulty.
- Engage the speaker cover (1)
correctly into the instrument panel (2)
.