Removing the seat cover for the rear seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .
- Refer to REMOVING THE COMPACT SPARE WHEEL .
- Refer to REMOVING THE VEHICLE TOOL KIT .
- Refer to REMOVING THE HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
- Refer to REMOVING THE LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to REMOVING REAR SEAT BENCH .
- Unclip the ISOFIX glares (1).
- Unclip the seat cover (1) in the arrow direction.
- Lever out the edge stripping in the marked area with a suitable tool.
- If necessary, unlock and disconnect all present plug connections.
- Remove seat fabric.
- Loosen all clamps on the trim wires (marks).
- Remove any remaining clamp from the seat cover and the upholstery.
- Remove the seat cover from the upholstery.