Installing the lumbar support with pump

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Correctly position and fasten the lumbar support (1) in the marked areas on the spring wire (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in the pump (3) and position it correctly.
Fasten the cable tie (1).
Connect connectors (2) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Correctly position the valve unit (2) and fasten it on the spring wire.
Clip the pneumatic lines into the brackets in the marked areas.
Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE BACKREST COVERING WITH THE CUSHION .
Refer to INSTALLING SIDE AIRBAG ON FRONT SEAT .
Refer to INSTALLING TRIM FOR THE HATCH IN THE FRONT SEAT BACKREST .
Refer to INSTALLING THE COVER FOR THE BACKREST ADJUSTMENT .
Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
Refer to INSTALLING FRONT SEAT .
Refer to INSTALLING THE FRONT STRAP FITTING .