Installing the seat frame

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Different variants may be installed depending on the vehicle equipment.

Position and fasten all mounted parts on the seat frame (1) .
Correctly position the seat frame (1) .

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The operations shown only for one side must be carried out on both sides.
Replace screws (1) .
Parts: Screws

Tighten down screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Seat frame on backrest frame
Screw Replace screw.	tightening torque	44 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to REMOVING THE SEAT COVER WITH THE CUSHION .
Refer to INSTALLING THE THIGH SUPPORT ON THE FRONT SEAT .
Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT .
Refer to INSTALLING THE LEVER FOR THE SEAT HEIGHT ADJUSTMENT .
Refer to INSTALLING THE STEERING LEVER FOR ADJUSTING THE BACKRESTS .
Refer to INSTALLING THE COVER FOR THE BACKREST ADJUSTMENT .
Refer to INSTALLING FRONT SEAT .
Refer to INSTALLING THE FRONT STRAP FITTING .