Installing the seat mechanism for the front seat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Position the backrest frame (2) .
- Replace screws (1).
Parts: Screws
- Tighten screws (1)
on the left and right.TIGHTENING TORQUE SPECIFICATIONS
Backrest frame on seat mechanism Screw
Replace screw.Tightening torque 44 Nm - Equipment specification with ISOFIX only:
- Secure holder (2)
with rivet (1).
- Insert the wiring harness (1).
- Snap the connector housing (2) into the seat mechanism.
- Secure the wiring harness (1)
to all cable clips.
Follow-up work
- Refer to FITTING THE SEAT COVER WITH THE UPHOLSTERY FOR THE FRONT SEAT .
- Refer to INSTALLING THE INNER COVER ON THE FRONT SEAT .
- Refer to INSTALLING THE OUTER COVER ON THE FRONT SEAT (MECHANICAL) .
- Refer to INSTALLING BACKREST ADJUSTMENT LEVER ON FRONT SEAT .
- Refer to INSTALLING THE LEVER FOR THE SEAT HEIGHT ADJUSTMENT ON FRONT SEAT .
- Refer to INSTALLING LEVER FOR SEAT ANGLE ADJUSTMENT ON FRONT SEAT .
- Refer to INSTALLING FRONT SEAT .
- Refer to INSTALLING THE FRONT STRAP FITTING .