Removing the vibration damper
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING FRONT CROSS CONNECTION .
- Refer to REMOVING FRONT RIGHT WHEEL .
- Refer to REMOVING THE FRONT UNDERBODY PROTECTION .
- Refer to REMOVING THE FRONT RIGHT WHEEL ARCH COVER .
- Refer to REMOVING THE DRIVE BELT FOR ALTERNATOR .
- Unscrew the transmission bolts (1).
- Feed out protective cap (2) and remove.
- Prepare special tool 0 493 587 (11 8 180) .
- Secure special tool 0 493 587 (11 8 180) with the transmission bolts.
- Slide the special tool 2 288 159 into the transmission housing and fix the flywheel.
- Tighten down all screws.
- Remove screws (arrows).
- Feed out vibration damper (1) and remove.