Remove the test gauges for securing the camshafts
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Remove screws (arrows).
- Thread out the test gauge (2) from the set of special tools 2 358 122 between the intake camshaft and the basic carrier (1) of the set of special tools 2 456 372 and remove .
- Thread out the test gauge (3) from the set of special tools 2 358 122 between the exhaust camshaft and the basic carrier (1) of the set of special tools 2 456 372 and remove .