Installing The New Bracket, Rear
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Position holder (1) .
- Tighten down screws (2)
.TIGHTENING TORQUE SPECIFICATIONS
Holder to A-pillar M8 screw Tightening torque 8 Nm - Remount the sheet metal nut (3)
on the new bracket.
Follow-up work
- Refer to INSTALLING THE LEFT FRONT SIDE PANEL .
- Refer to INSTALLING THE FRONT WHEEL ARCH COVER .
- Refer to INSTALLING THE FRONT WHEEL ARCH TRIM .
- Refer to MOUNTING THE WHEEL .
- Refer to RESETTING THE TIRE PRESSURE MONITOR .
- Refer to INSTALL THE GUTTER STRIP ON THE WINDSCREEN .
- Refer to INSTALLING SIDE PANEL SEALING .