Installing A New Front Holder

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Position holder (3),

Tighten down screw (2),

TIGHTENING TORQUE SPECIFICATIONS

Cross bracket on wheel well
M6 screw
	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (1),

TIGHTENING TORQUE SPECIFICATIONS

Headlamp to carrier support extension
Multi-purpose hexagon screw with washer
	Tightening torque	5 Nm

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Extension carrier support to carrier support
M8 screw
	Tightening torque	19 Nm

Tighten down screws (2).

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

Extension carrier support to cross bracket
M6 screw
	Tightening torque	8 Nm

Remount the sheet metal nut (3) on the new bracket.