Install B-Pillar With Reinforcement
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Use only approved spot welder for repair.
For additional information see: 41 00... Workshop equipment
Use only approved spot welder for repair.
For additional information see: 41 00... Workshop equipment
- Install the new B-pillar inner section and B-pillar reinforcement using an alignment bracket or universal fixture and secure in place.
- Weld the new parts in areas (1)
according to the new part preparation process.
- Weld the new parts in areas (1)
according to the new part preparation process.
- Weld new part in areas (1)
and (2)
as per new part preparation processes.
- Weld the new part in the area (1)
according to the new part preparation process.
- Weld the new parts in areas (1)
according to the new part preparation process.NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Installation of cavity sealing (expanded) - Coat sealant on cavity sealing (1).
- Install new part B-pillar outer skin and reinforcement plates and weld in area (2)
according to the new part preparation process.