Prepare New Part
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Mark severance cuts on new part in accordance with severance cuts on vehicle and cut.
- Remove unneeded components from the new part.NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Welding in reinforcement plates (sheet steel) - Prepare reinforcement plates at severance cuts.
- Adjust reinforcement plates and new part to fit.
- Prepare the new part and reinforcement plate (1)
in area (2)
for joining through welding.
- Prepare the new part and the reinforcement plate (1)
in areas (2)
for joining by welding.NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Spot-weld bonding steel components - Prepare area (3) for joining by welding. In area (3), observe the procedure for the replacement of spot-welded adhesive joints for the series.
Renew T-bolt
NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details. - Take the quantity and position from the component to be renewed.
- Renew T-bolts (1).
Parts: T-bolt
- Weld the T-bolt (1)
onto the new part.