Install The Outer Section Of The A-Pillar

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Use only approved spot welder for repair.
For additional information see: 41 00... Workshop equipment

NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Installation of cavity sealing (expanded)

Apply sealant to cavity sealing (1).
Install the new part and the reinforcement plates (2).
Weld the new part and reinforcement plates in areas (3) and (4) as per new part preparation processes.

Courtesy of BMW OF NORTH AMERICA, INC.