Removal Of The Luggage Compartment Center Floor Piece

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Prepare the following new parts (see Electronic Parts Catalog [EPC]):
Boot floor (1)

NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Overview of consumables in Electronic Parts Catalog

Courtesy of BMW OF NORTH AMERICA, INC.

Supply the following consumables:

Material	Quantity
Adhesive K5 (50 ml)	2
Blind rivet N3	30
Coarse thread bolt	30
EMC screw	3
Cleaning agent R1	1
Cleaning agent R2	1
Sealing compound D1
Cavity protection wax remover

Make the separating cut (1) according to the schematic diagram.
Carry out a separating cut so that enough material remains on the luggage compartment floor so that overlapping joining can be done using the bonded rivet method.
Loosen welded connections in areas (2).

Courtesy of BMW OF NORTH AMERICA, INC.