Remove Engine Mount

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Open welded connections in areas (1) and (2).
Ensure that 3 panels are welded in the area (2).
Release welded connections in area (2) for both outer panels.

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen welded connections in areas (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Mark a separating cut (1) as shown and according to the specified dimension and execute it.
Dimension a = 5 mm.
Release the welded connections in areas (2) and (3) and remove the engine mount.

Courtesy of BMW OF NORTH AMERICA, INC.