Notes On Repairing Threads Rep-Alg-RAF4541-4100_HELICOIL-V.8 (X2 2018-2023)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Attention!
Install Helicoil thread inserts so that they are flush with the original thread.
NOTE:
Damaged threads may be repaired with Helicoil thread inserts. Observe the PROCEDURE
described in the example.
| screw connection | vehicle | Screw/bolt fastening point(s) | Helicoil thread insert |
|---|---|---|---|
| Front axle support to engine mount | F45/F46/F48/F49/F52 | Front | M12x1.5x18 |
| Rear | M14x1.5x21 | ||
| Holder, wishbone, to engine mount | F45/F46/F48/F49/F52 | All | M10x1.5x15 |
| Holder, wishbone, to front axle support | F45/F46/F48/F49/F52 | All | M12x1.5x18 |
| Rear axle support to side member/cross-member | F45/F46/F48/F49/F52 | All | M12x1.5x18 |
| Bearing bracket, trailing arm to side member | F45/F46/F48/F49/F52 | All | M12x1.5x18 |