Enter Vehicle Identification Number Rep-Rep-RAF5641-4108200-V.4 (X2 2018-2023)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

83 30 2 359 240

NOTE: If the stamped vehicle identification number is removed during a repair, it must be stamped in again.

Read and comply with General Notes.

Preliminary work needed:

Remove front right spring strut. Refer to REMOVING AND INSTALLING FRONT LEFT OR RIGHT SPRING STRUT REP-REP-RAF4931-3131000_PHEV-V.4 (X2 2018-2023) .
Set of special tools 83 30 2 359 240 for stamping vehicle identification number consists of:

Guide plate (1)

Counter-support plate (2)

screw

Courtesy of BMW OF NORTH AMERICA, INC.

Position counter-support plate on spring strut from bottom.

Position guide plate (1) on spring strut support plate from top and screw to counter-support plate.

Insert punch numbers (2) individually into guide plate and stamp vehicle identification number.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: In the event of component or body replacement by the workshops/garages, clearly delimit the vehicle identification number at front and rear by stamping a "+" in place of the BMW symbol.

Note national regulations.