LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> M240i 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Propeller Shaft -- Repair X2 (F39)) >> 26 00 Propeller Shaft, General >> Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive (X2 xDrive 28i 2018-2023, X2 M35i 2019-2022)

Additional work on all-wheel drive vehicles after driving with faulty (non-engaging) drive (X2 xDrive 28i 2018-2023, X2 M35i 2019-2022)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: If the vehicle has been shifted under engine power with a non-engaging drive system (e.g. faulty front prop shaft, or one output shaft is no longer engaging with the drive flange, rear axle differential faulty/no power transmission), it is mandatory to calibrate the transfer box after having repaired the prop shaft/output shaft(s).

Carry out calibration after having completed the repair using the diagnostic system and information system, in control unit function -

Functional check - Transfer box.

scientia non olet · About LEMON Manuals