Installing the control unit for the camera-based driver assistance systems (KAFAS)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the connector (1) at the KAFAS control unit (2).
- Position the KAFAS control unit (1) in the equipment holder (2).
The KAFAS control unit (1) must correctly engage with the equipment holder (2).
Follow-up work
- Refer to INSTALLING RIGHT GLOVE COMPARTMENT .
- Refer to INSTALLING KNEE AIRBAG .
- Refer to INSTALLING THE SIDE PANEL ON INSTRUMENT PANEL ON THE RIGHT .
- Refer to INSTALLING THE BOTTOM RIGHT INSTRUMENT PANEL TRIM .
- Refer to ENCODE/PROGRAM CONTROL UNIT (S) .