Remove the top sensor line for the contactless tailgate opening

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.

Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
Read and comply with user information on using the associated special tool 12 7 060.
Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Preliminary work

Refer to REMOVING BOTH TRIM PIECES FOR THE WATER CHANNEL .
Refer to REMOVING BOTH TAIL LIGHTS FROM THE SIDE PANEL .
Refer to REMOVING REAR BUMPER PANEL .

Guide out access line (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Release top sensor line (2) on the clips (1) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock and disconnect the associated connector (1) on the control unit.

Courtesy of BMW OF NORTH AMERICA, INC.