LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2017 >> M240i 2D Convertible, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 207 (General Electrical System -- Repair X2 (F39)) >> 61 31 Switch, Sensor >> 61 31 231 Removing and installing/replacing steering wheel electronics control unit (X2 2018-2023) >> Removing the control unit for the contact detection

Removing the control unit for the contact detection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Pyrotechnic components.
Danger! Immobilization period-threatening injuries!
WARNING: Airbag unit.
Danger! Immobilization period-threatening injuries!
NOTE: RISK OF DAMAGE
Electrostatic discharge.
Damage to or destruction of electrical components.
  • Leave the electrical components in their original packaging until they are being installed. Only use the original packaging for returning the product. Always package removed components straight away.
  • Read and comply with user information on using the associated special tool 12 7 060.
  • Only tap the housings of electrical components. Do not tap pins or multi-pin connectors directly.
  • Wear electrically conductive clothing and antistatic shoes (with ESD symbol).
  • For additional information see: NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Preliminary work