Install the finisher on the door trim panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Saw off all welding pins (1) on the finisher along the molding (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Remove welding remnants on door trim panel with a scalpel.
Installing finisher.
NOTE: Welding pins must not protrude from the door trim panel.

Screw in and tighten the repair screws (arrows) in the door trim panel.

TIGHTENING TORQUE SPECIFICATIONS

Repair screw to door trim panel
Oval-head screw	tightening torque	2.3 Nm

If necessary, mount the LED module.

Courtesy of BMW OF NORTH AMERICA, INC.