Attaching the sound insulation for the windshield panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .

Clean the adhesive area for the sound insulation (1) for the windshield panel.
Replace the sound insulation (1) for the windshield panel.
Parts: sound insulation
Stick the sound insulation (1) for the windshield panel along the mark (2) on the windshield.

Courtesy of BMW OF NORTH AMERICA, INC.