Remove the spindle drive of the tailgate at right

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Removing spindle drive of the tailgate

CAUTION: Shutting hood or trunk lid .
Injury hazard!

Support hood/trunk lid in fully open position with the aid of a suitable device.

Remove grommet (1) from the body panel.
Unlock and disconnect the two plug connections (2).
The plug connections (2) must be outside the body.

Courtesy of BMW OF NORTH AMERICA, INC.
Open locks (1) on spindle drive (2) at the top and bottom and remove spindle drive (2).

Courtesy of BMW OF NORTH AMERICA, INC.