Install the cover on the outside door handle

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Make sure the gasket (1) is fitted correctly.

Courtesy of BMW OF NORTH AMERICA, INC.
Check the latch mechanisms (1) of the cover (2) for damage and replace the cover (2) as needed.
The latch mechanisms (1) must not be damaged or missing.
When replacing the cover (2): Remount retaining plate (3).

Courtesy of BMW OF NORTH AMERICA, INC.
Install the cover (1) with the outside door handle (2) slightly open.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Attachment bell to outside door handle support
screw	Tightening torque	3 Nm

Mount the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.