Removing the grab handle

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Expand the grab handle (1) towards the bottom.
Disengage and remove the locking insert (2) with an angle screwdriver (3) as shown.

Courtesy of BMW OF NORTH AMERICA, INC.
Pull the grab handle (2) slightly to the inside and hold it.
Release the top and bottom release tab (1) with a suitable screwdriver (3) in the arrow direction respectively.
Guide the grab handle (2) out.
Repeat the operation on the other side of the grab handle (2).

Courtesy of BMW OF NORTH AMERICA, INC.