Remove BMW badge on the rear side panel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .

Protect working area.
Handle tools and components carefully.

Tape off working area around the BMW badge (1) with adhesive tape.
Carefully heat the BMW badge (1) with a hot air blower (temperature approx. 40-55°C).
Carefully detach the BMW badge (1) from the adhesive strip with the special tool 0 496 571 (00 9 327) and lever out of the guide pins (2) .
The badge must be replaced after disassembly at all times.

Courtesy of BMW OF NORTH AMERICA, INC.