Installing the front emblem

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Notes on component bonding using adhesive tape form the basis for these repair instructions and must be observed without fail.
For additional information see: NOTES ON COMPONENT BONDING WITH ADHESIVE TAPE .

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Remove the adhesive residues at the bumper cover and clean the adhesive area.
CONSUMABLE SPECIFICATION

Cleaning agent R2 500 ml 83190417324
Pull off the liner from the adhesive tape (2).
Position the emblem (1) over the guides (3) and press on tight.

Courtesy of BMW OF NORTH AMERICA, INC.