Remount ultrasonic sensors
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Unlock the detents (1).
- Remove the ultrasonic sensor (2) towards the top.
- Remove all other ultrasonic sensors together with the wiring harness.
- Replace the ultrasonic sensors.
Parts: Ultrasonic sensors
- Snap all ultrasonic sensors into the bumper.
- Secure wiring harness.
Follow-up work
- Refer to INSTALLING REAR BUMPER PANEL .
- Refer to INSTALLING BOTH TAIL LIGHTS ON THE SIDE PANEL .
- Refer to INSTALLING BOTH TRIM PANELS FOR THE WATER GUTTER .