3331 Rear Axle Carrier
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
33 31 REAR AXLE SUPPORT - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rear axle carrier to body | F39/F45/F46/F48/F49/F52 | M12 | Replace screws. | 100 Nm |
| 2AZ Cross member/bridge to rear axle support | F39/F45/F46/F48/F49/F52 | M12 | Replace screws. Tightening torque Angle of rotation |
100 Nm 90° |
| 3AZ Cross member to body | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M12 | 100 Nm | |
| 4AZ Cross member to rear axle final drive | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M10 | 56 Nm | |
| 5AZ Hydraulic vibration absorber to cross member | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M12 | Replace screw. | 96 Nm |
| 6AZ Vibration absorber to cross member | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M8 | Replace screw. | 28 Nm |
| 7AZ Additional mass to cross member | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M8 | Replace screw. | 28 Nm |
| 8AZ Cover to cross member/rear axle differential | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M6 | 12 Nm | |
| 9AZ Vibration absorber on side member/body on the rear left and right | F39 | 50 Nm |
3331 TIGHTENING TORQUE OVERVIEW
| Electrical machine electronics (EME) to rear axle support | ||
| M10 | Tightening torque | 56 Nm |