3310 Rear Axle Differential
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
33 10 REAR AXLE DIFFERENTIAL - TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Clutch to rear axle final drive | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M10 | Tighten crosswise. | 65 Nm |
| 2AZ Longitudinal torque distribution control unit to holder | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M6 | 10 Nm | |
| 3AZ Longitudinal torque distribution control unit holder to rear axle differential | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M6 | 10 Nm | |
| 4AZ Three-hole flange to rear axle differential clutch | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M16x1.5 | Replace nut. | 150 Nm |
| 5AZ Hydraulic pump to clutch, rear axle final drive | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | M6 | 10 Nm | |
| 6AZ Pressure relief valve on rear axle differential clutch | F39AWD/F45AWD/F46AWD/F48AWD/F49AWD | 15 Nm |