Programming the control unit (DME/DDE) (X2 2018-2023)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Switch off ignition .

Connect diagnostic system.

Switch the ignition on.

Select "Programming".

Follow the instructions in the diagnostic system.

Adjust the following control units:

EWS (electronic immobilizer)
DME (Digital Motor Electronics) or
DDE (Digital Diesel Electronics)

Follow Service Information DIAGNOSIS AND CODING on the topic of programming.