Install the exhaust camshaft sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Insert and install the exhaust camshaft sensor (3).

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Exhaust camshaft sensor to cylinder head cover
TS5x20	tightening torque	4 Nm

Connect and lock the connector (1).
Make sure connector (1) engages audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to IF INSTALLED: PARTIALLY INSTALLING ENGINE VENTILATION LINE .
Refer to INSTALLING ACOUSTIC COVER .