Installing intake camshaft sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Position the intake camshaft sensor (3).

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Intake camshaft sensor to cylinder head cover
TS5x20	tightening torque	4 Nm

Connect and lock the connector (1).
Make sure the connector (1) engages audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING ACOUSTIC COVER .