Installing the ignition coils

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Feed in and install the ignition coil (1) in the direction of the arrow.

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten screw (2) on ignition coil (3).

TIGHTENING TORQUE SPECIFICATIONS

Ignition coil to cylinder head cover
Screw M6	Tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connectors (1) and lock.
Make sure the connector (1) engages audibly.
Insert connector (2) in the direction of the arrow and install.
Ensure that the locking mechanism (1) engages audibly.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to IF INSTALLED: PARTIALLY INSTALLING ENGINE VENTILATION LINE .
Refer to INSTALLING ACOUSTIC COVER .