Securing the anti-roll bar on the left and right on the anti-roll bar link
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the left and right side.
Fastening the anti-roll bar on the anti-roll bar link
- Position the anti-roll bar link on the anti-roll bar.
- Replace nut (1)
.
Parts: Nut
- Tighten nut (1)
.NOTE: Counter-hold at the Torx socket.
TIGHTENING TORQUE SPECIFICATIONS
| Anti-roll bar link to anti-roll bar/spring strut | ||
|---|---|---|
| M10 Replace nut. |
tightening torque | 56 Nm |