Removing seat bench
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Removing the luggage compartment removable panel
- Slightly raise the luggage compartment removable panel (1) at the handle, release from the detents (2) and remove to the rear.
Removing the compact spare wheel
- Loosen screw (1).
- Remove the cover (2).
- Remove shelf from the emergency wheel (1).
- Remove emergency wheel (1).
Removing the vehicle tool kit
- Open the hook and loop tape (1).
- Remove the vehicle tool kit (2).
Removing the hook and loop tape for the vehicle tool kit
- Loosen screw (1).
- Remove the hook and loop tape (2).
Removing the luggage compartment floor covering
- Remove the luggage compartment floor covering (1) upwards.
- Unclip the covers (1) forwards.
- Loosen screws (1).NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .- Protect working area.
- Handle tools and components carefully.
- Cover the door sill using protective covers.
- Fold down rear seat backrest (1) on left and right.
- Loosen screws (2).
- Disconnect existing plug connections where required.CAUTION: Heavy component .
Heavy components can lead to injury or damage .- Remove and install heavy components with the aid of another person/other persons.
- Lift out rear seat bench with the assistance of a second person.