Partially installing the front right wheel arch cover
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Partially install the front wheel arch cover
- Fold the front wheel arch cover (3) forward.
- Mount blind rivet (2) using the special tool 0 496 521 (00 2 230).
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| Front wheel arch cover to front bumper panel | ||
|---|---|---|
| Hexagon screw for thermoplastic plastic | Tightening torque | 2.6 Nm |