Installing the rear heat shield
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Insert and install the heat shield (4) .
- Tighten the screws (arrows).TIGHTENING TORQUE SPECIFICATIONS
Heat shield to body Screws/nut Tightening torque 3 Nm - Tighten nuts (3)
.TIGHTENING TORQUE SPECIFICATIONS
Heat shield to body Screws/nut Tightening torque 3 Nm - Insert and install the holder (2) .
- Tighten down screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Holder to body | ||
|---|---|---|
| M8 | tightening torque | 21 Nm |