Install the heat shield on the exhaust turbocharger, top
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Fit and install the heat shield (1) on the exhaust turbo charger, top.
- Make sure that the heat shield (1)
is correctly positioned (2)
on the heat shield.
- Tighten the screws (1)
on the heat shield (2)
.TIGHTENING TORQUE SPECIFICATIONS
Heat shield to console/heat shield M6 tightening torque 8 Nm - Feed in and install the heat shield (2) .
- Tighten down screw (1)
.TIGHTENING TORQUE SPECIFICATIONS
Heat shield to console/heat shield M6 tightening torque 8 Nm - Tighten down screw (1)
.TIGHTENING TORQUE SPECIFICATIONS
Heat shield to console/heat shield M6 tightening torque 8 Nm - Fit and secure the coolant line (2) to the holder (3) .
- Tighten down screw (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Coolant line to cylinder head | ||
|---|---|---|
| M6 | Tightening torque | 8 Nm |