Install torsion strut

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.

NOTE: Description is for left component only. Procedure on the right side is identical.

Install torsion strut (2).
Replace screws (1).
Parts: Screw

Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Torsion strut to mounting
M12 Replace screws.	Tightening torque	100 Nm
M12 Replace screws.	Angle of rotation	90°

Courtesy of BMW OF NORTH AMERICA, INC.