Installing the front underbody protection
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
- Guide the front underbody protection (1) in under the bumper panel and position it at the screw points.
- Tighten screws (arrows).TIGHTENING TORQUE SPECIFICATIONS
Underbody protection front Screw for thermoplastic plastic Tightening torque 2.6 Nm Hexagon screw M6x20 Tightening torque 8 Nm - Equipment specification with metal underbody guard:
- Guide in and attach the underbody guard (3).
- Tighten down screws (1) and (2).TIGHTENING TORQUE SPECIFICATIONS
Underbody protection front Screw for thermoplastic plastic Tightening torque 2.6 Nm Hexagon screw M6x20 Tightening torque 8 Nm