Installing the front wheel speed sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.

Install the wheel speed sensor (2).
Replace the screw (1).
Parts: Screw.
Position and tighten the screw (1).

TIGHTENING TORQUE SPECIFICATIONS

Front wheel speed sensor on swivel bearing
Screw Replace screw.	Tightening torque	12 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Install the cable into the holder on the spring strut.
Connect connectors (2) and lock.
Hook the cable of the wheel speed sensor into the holders (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE FRONT WHEEL ARCH COVER .
Refer to ATTACHING THE FRONT LEFT WHEEL .