Remove hydraulic unit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW X2, 2022 BMW X2, 2021 BMW X2, 2020 BMW X2, and 2019 BMW X2. However, it is still accessible from the selected car via links, so may be relevant.
Preliminary work
- Refer to REMOVING REAR HOOD SEAL .
- Refer to REMOVING THE GUTTER STRIP ON THE WINDSCREEN ON THE LEFT AND RIGHT .
- Refer to REMOVING FRONT WINDSHIELD PANEL COVER .
- Refer to REMOVING LEFT AND RIGHT WIPER ARM .
- Refer to REMOVING THE REAR COWL PANEL .
- Refer to INSTALLING BRAKE PEDAL TENSIONER .
- Disconnect plug connection (1)
.NOTE: TECHNICAL INFORMATION
Do not interchange brake lines. If necessary, mark the brake lines before disassembly.
Note various equipment specifications with different line seizure.
Do not bend brake lines.
Close off connecting bores with seal plugs. - (2) Unfasten brake lines.
- Release the screw (3) and remove the hydraulic unit (4) .